computer radio control system
EN
1.4 Table of Contents
extended functions from swshop.jetimodel.com.
To make navigation faster, the DC/DS transmitter Instruction Manual
has been divided into 5 basic groups:
1 . Introduction and product support.
2. Basic description and mechanical adjustments.
3. First time switch-on. Basic helicopter and airplane set up.
4. Advanced programming. Detailed descriptions.
5. PC upgrade/upload, safety information, and special mixes.
Important parts of the instructions are separated from the text and
highlighted according to importance.
Advice Note Warning
Advanced modelers may want to begin with group 3 where you will
get all of the basic information for model setup. This is the quickest
way to understand the basic ideas of the DC/DS transmitter
programming and with this basic information you can begin to
create your own model. More advanced programming functions are
found in group 4. This is where you can find detailed descriptions of
all of the DC/DS functions. The last section provides detailed
description of firmware upgrades, downloads, and special mixes.
1.1.
10
To Next Page
Loading...
