computer radio control system
EN
2.2.
1. Switch off the transmitter and remove the 8 screws that secure
the radio back cover. Next, remove the radio back cover.
Be sure to disconnect the transmitter battery pack
connector.
2. For ratchet tension adjustment use the machine screw “A”. Turn
slowly (anticlockwise) until you achieve the desired ratchet
tension. For smooth tension adjustment, use the machine screw
“B”. Turn slowly (clockwise) until you achieve the desired
smooth tension.
4.4.4 Ratchet Tension Adjustment
Do you prefer smooth throttle feel or ratchet throttle feel? You can
adjust the DS-16 transmitter either way you like allowing you to fully
customize your radio‘s handling. Each tension is set by a different
machine screw.
3. Reconnect transmitter battery pack and reinstall radio back
cover and cover screws.
4.4.5 Throttle stick travel adjustment
The throttle stick travel is adjustable to suit your flying style.
1. Switch off the transmitter and remove the 8 screws that secure the
radio back cover. Next, remove the radio back cover. Be sure to
disconnect the transmitter battery pack connector.
2. Use indicated machine adjustment screws to limit the throttle
stick travel. By turning the screw clockwise, you will shorten the
throttle stick travel.
3. Reconnect transmitter battery pack and reinstall radio back cover
and cover screws.
AB
DS-14DS-14DS-14
DS-16DS-16DS-16
AB
2
2
DS-14DS-14DS-14
DS-14DS-14DS-14
DS-16DS-16DS-16
DS-16DS-16DS-16
31
To Next Page
Loading...
Need help?
General
