computer radio control system
EN
4. 4.
9.7 Throttle Lock
Throttle lock is an important safety feature incorportated in your
DC/DS transmitter. This feature effectively "locks" the throttle
channel output leaving it at the last output value so that if your
motor is stopped, it cannot start accidentally. To activate/deactivate
the throttle lock go to the „Main Menu“ and then press the „F1
(lock/unlock)“ button. You will see the small padlock icon change
to indicate the lock/unlocked condition. Additionally, when the
throttle is locked, you will see a padlock icon appear in the center of
the top bar of the desktop.
Use the throttle lock whenever you are handling a model
whose power system is active to eliminate the chance of
accidental activating the throttle and unexpected starting
of the motor.
Hint:
This menu allows you to select your desired input control device
(switch, knob, stick or logical switch) for a given function. This menu
will appear any time you edit an input control device seletion. In this
menu you can also assign/edit how a control device functions. You
can set the control device to have two types of proportional output
or just a simple ON/OFF function. From this menu you can also
reverse the control device’s functional direction.
9.8 Select Input control
135
To Next Page
Loading...
