JETI model Duplex DS-16 User Manual

computer radio control system
EN
Module
Warning message
Possibility of
loading with
module not
activated
Accelerometer
-
YES
Double Path
If the Double Path mode is activated (menu Advanced Properties -
>Wireless Modes/Trainer)
NO
Data analysis
-
YES
Audio player
-
YES
Voice output
If any control starting the voice output is assigned (Timers/Sensors -
>Voice Output)
YES
Servobalancer
If any check point of the servobalancer has a non-zero position on the Y
axis (menu Model->Servo setup)
NO
Function curves
If a different curve type than „Standard“ is selected in the menu „Fine
tuning ->Function Curves”
NO
Throttle limiter
If a control is assigned in the menu „Fine tuning ->Throttle Limiter”
NO
Vario
If the vario indication mode (Timers / Sensors->Vario) is not in the Off
state.
YES
Number of channels
If an output of any function in the menu „Model->Servo Assignment” is
assigned to the transmitter channel that is not activated.
NO
Flight modes
If the number of flight modes of the model is higher than the number of flight modes in the transmitter.
NO
Free mixes
If the number of free mixes used in the model is higher than the number
of free mixes available in the transmitter.
NO
Logic switches
If the logic switch is activated in the position that is not available in the
transmitter.
NO
Device explorer:
Number of remote commands
If the number of registered commands in the model is higher than the
number of commands available in the transmitter.
YES
Sequencer
If the trigger switch is assigned to a sequencer that is unavailable in the
transmitter.
NO
Timers
If the number of timers in the model is higher than the number of timers available in the transmitter.
YES
Values on display
If the number of values on display in the model configuration is higher than the number of values available in the transmitter.
YES
Event sounds
If the number of event sounds in the model is higher than the number of event sounds available in the transmitter.
YES
Alarms
If the number of active alarms in the model is higher than the number of
alarms available in the transmitter.
YES
Gyro settings
If the number of active gyro functions in the model is higher than the
number of functions available in the transmitter.
NO
Functions
If the number of model features in the model configuration is higher than
the number of features available in the transmitter (menu Model-
>Functions Assignment)
NO
Telemetry controls
If the telemetry control is activated on the position that is not available in
the transmitter (menu Advanced Properties->Telemetry Controls)
NO
The table 9.6.8 - Limitations in copying models between transmitters
4.
4.
134

JETI model Duplex DS-16 Specifications

General

Brand	JETI model
Model	Duplex DS-16
Category	Remote Control
Language	English