computer radio control system
EN
This is also one of the more commonly used mixes for sailplanes.
Mixing flaps with your ailerons will increase you model’s aileron
response. You can use one of the free mixes to set up this mixing
function.
12.11 Aileron to Flap Mix
1. From inside the „Fine Tuning, >Free
mixes“ menu, press the „F2 (Add)“ button
to create a new mix.
2. In the „From“ menu line, select the
“Flaps” input function as the master
function and in the „To“ line select the
“Ailerons” for your slave function. The
“Master Value” represents the percentage
of elevator travel as it relates to the spoiler
travel. Press “F5 (Next)” to save the mix.
3. To edit the mix simply highlight the mix
and press the “F4 (Edit)” button to go into
the selected mix’s advanced menu.
a. Flight mode setting configuration
b. Curve type icon
c. Switch assignment for the spoiler mix function
d. Delay for the mix function deployment or retraction
e. Output travel settings for the individual servos
5.
5.
e
a
b
c
d
152
To Next Page
Loading...
Need help?
General
