computer radio control system
EN
a. Flight mode setting configuration
b. Curve type icon
c. Switch assignment for the spoiler mix function
d. Delay for the mix function deployment or retraction
One of the most commonly used mixes for 3D planes, this mix helps
to improve your control in knife-edge flight and while performing
other 3D aerobatics. You can use one of the free mixers to set up this
mixing function.
12.8 Rudder to Ailerons Mix
1. From inside the „Fine Tuning, >Free
mixes“ menu, press the „F2 (Add)“ button
to create a new mix.
2. In the „From“ menu line, select the
“Rudder” input function as the master
function and in the „To“ line select the
“Ailerons” for your slave function. The
“Master Value” represents the percentage
of elevator travel as it relates to the spoiler
travel. Press “F5 (Next)” to save the mix.
5.
5.
a
b
c
d
149
To Next Page
Loading...
Need help?
General
