JETI model Duplex DS-16 - Page 109

computer radio control system
EN
4. 4.
Switch 1
Switch 2
The result of the operator
AND
OR
Multi
\
\
\
\
\
\
]
\
]
#
]
\
\
]
#
]
]
]
]
]
3. Emulating a 3-Position Switch
You can use the logic function “Multi” to allow the logic switch to act
as a 3-position switch. The “Multi” logic function can combine the
output from two 2-position switches to create a logic switch with
three output conditions.
]
]]
]
4. Using Proportional Logical Switches
The logical switches also offer the option of a complete proportional
evaluation that could be applied to both controls. Just select an
input stick/slider, press the F2 “Prop.” button in the same menu
(picture ) and confirm. Then edit the selection box with options e)
“X<”, “X>”, “Lin” and make sure that you select the “Lin” option
(picture ). At this point, the logical switch starts to act as a c)
proportional control.
You can combine more controls using logical conditions:
a)
b)
c)
d)
e)
f)
108