EasyManuals Logo

JETI model Duplex DS-16 User Manual

JETI model Duplex DS-16
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
computer radio control system
EN
4. 4.
Percentage of travelc)
Exponential rate settingd)
Assignable switch optione)
Graphic interfacef)
1. Expo Global or Separate Setting
Expo configuration for all channels can be set collectively for all
flight modes by selecting the “G-Global (globe)” symbol or you can
allow individual expo settings in each separate flight mode by
sellecting the “S-Separate” symbol.
2. Expo/Dual Rates Switch Assignment
By selecting “Switch Option” you will access the“Select Input (e)
Control” screen where you can select the control element that you
wish to control the dual rate and/or expo for the selected function.
For simple dual rates, a 2-position switch is sufficient. For more
complex triple-rates, any 3-position switch or one of the fully
proportional channels can be selected. Then your selected switch is
assigned. While the “Select Input Control” screen is still visible you
can change the switch travel by using “F2 (Prop.)” button to select
the proportional setting. The correct function can be verified in the
“Dual Rate Edit” screen by activating the switch and observing the
position number change to “Position 1-2” for a two position switch
or, if 3-position switch is used, to “Position 1-2-3”. For a 3-position
switch you will also need to use the F1 (Centr)“ button before all
three positions are correctly displayed.
Expo/Dual Rates Travel Setting 3.
Every switch position can define a different function and (b)
exponential value. Any change made to the settings can be directly
observed on graphic interface .(f)
Dual/Triple rate setting is defined by percentage of the travel . A (c)
higher number increases travel, a lower number decreases travel.
Expo rate is defined by percentage of the function curve Zero (d).
rate represents linear function. As expo rate increases linear travel
changes to exponential “curve” travel.
Exponential and Dual rate settings combined with flight modes
create virtually unlimited customizability.
For smooth, precise flight we highly recommend setting
up exponential and dual rates.
Advice:
87

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JETI model Duplex DS-16 and is the answer not in the manual?

JETI model Duplex DS-16 Specifications

General IconGeneral
BrandJETI model
ModelDuplex DS-16
CategoryRemote Control
LanguageEnglish

Related product manuals