Johnson Controls tyco iSTAR Edge G2 Installation And Configuration Guide

Gateways and Firewalls
iSTAR Edge G2 configurations provide access to remote C•CURE systems across firewalls and Network Address
Translators. This is because the master controller automatically accepts a translated IP address if one is assigned from a
remote host, or from an attached Network Address Translator.
The TCP/IP ports, listed in ,must be open and unblocked by any firewall. For more information on TCP/IP ports, check the
C•CURE 9000/iSTAR Ports Assignment Document available on the Software House website.
21

Johnson Controls tyco iSTAR Edge G2 Specifications

General

Brand	Johnson Controls
Model	tyco iSTAR Edge G2
Category	Controller
Language	English