Johnson Controls tyco iSTAR Edge G2 Installation And Configuration Guide

iSTAR Edge G2 Controller Installation and Configuration Guide 72
Chapter 8 - iSTAR Web Page
Upgrading Firmware
Use the iSTAR Web Page to upgrade the iSTAR Edge G2 firmware to the latest version.
Installing the firmware over an Ethernet connection
1. Copy the iSTAR Edge G2 firmware to any folder accessible by your web browser.
2. Navigate to the Advanced tab on the iSTAR Web Page and select the correct firmware file to start the upgrade process.
3. You may have to log out of the iSTAR Web Page and log back in when the firmware upgrade process is complete.

Johnson Controls tyco iSTAR Edge G2 Specifications

General

Brand	Johnson Controls
Model	tyco iSTAR Edge G2
Category	Controller
Language	English