EasyManuals Logo

Johnson Controls tyco iSTAR Edge G2 Installation And Configuration Guide

Johnson Controls tyco iSTAR Edge G2
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
iSTAR Edge G2 Controller Installation and Configuration Guide 70
Chapter 8 - iSTAR Web Page
Host Address Enter the host address when configuring either a master or a member panel.
Secondary Host
Address
Defines a secondary connection to the host (optional).
MAC Address MAC addresses are unique hardware addresses that identify controllers and other Ethernet devices. They are built into the
iSTAR at production time. A controller’s MAC address is printed on a label attached to the iSTAR. The first six nibbles of the
MAC address are fixed for allcontrollers (set at 00-50-F9).
IP Allocation Open the dropdown menu and select Static or DHCP. Software House recommends DHCP.
NOTE: If you select Static you must configure the IP address, Subnet Mask, Default Gateway, Primary DNS Server, and
Secondary DNS Server fields manually.
Lock IP Click the Lock IP toggle to lock the panel IP address. If the toggle is in the unlock position the panel can accept translated
addresses from a DNS server, C•CURE server, or other remote devices.

Table of Contents

Other manuals for Johnson Controls tyco iSTAR Edge G2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Johnson Controls tyco iSTAR Edge G2 and is the answer not in the manual?

Johnson Controls tyco iSTAR Edge G2 Specifications

General IconGeneral
BrandJohnson Controls
Modeltyco iSTAR Edge G2
CategoryController
LanguageEnglish

Related product manuals