3.9 APPLIED OPERATIONS
3ņ128
3
y
y y
Set C-MAP Display
Procedure 1 Press [RADAR MENU] key.
Press [9] key.
Press [5] key.
Or, hold down the [Map] key.
The MAP Setting Menu will appear.
3 Press [2] key.
The C-MAP Setting Menu will appear.
[1] Grid Display
x Sets whether or not latitudinal longitudinal lines are displayed with C-MAP.
x Each time you press [1] key, the grid display item is switched between ON and OFF.
x ON: Displayed
OFF: Not displayed
[2] Sounding Display
x Sets whether or not soundings values are displayed with C-MAP.
x Each time you press [2] key, the souding display item is switched between ON and OFF.
x ON: Displayed
OFF: Not displayed
[3] Sounding Unit
x Sets the units when soundings values are displayed with C-MAP.
x Press [3] key to display a list of units.
x 1: FEET
2: FATHOM
3: METERS
You can select one from the above three items. Select the item you want to set, pressing the numeric keys
[1] to [3].
[4] Light Sectors Display
x Sets whether or not the light sectors are displayed.
x Each time you press [4] key, the light sectors display item is switched between ON and OFF.
x ON: Displayed
OFF: Not displayed
To Next Page
Loading...
