5.6 TRACK DISPLAY
ņ68
5
yy
yyy
5.6.2 Other Ship's Tracks (Target Track Setting)
Make track settings for acquired tracked and AIS targets.
This equipment can display tracks of up to 20 other vessels.
The target track function is available between latitudes of 85°N and 85°S.
* Tracks of other ships will not be recorded with the Target Track Function is deactivated.
[I] Track color setting (Target Track Color)
Procedure 1 Turn OFF the cursor mode.
2 Place the cursor over a tracked target or an AIS target, and press the
[CLR/INFO] key.
3 Target information menu opens.
4 Press the [2] key.
Track color choices are listed (Track Color).
5 Press a number key for the desired color.
The track will be shown in the selected color.
[II] Turning on/off the Target Track Function
Procedure 1 Press the [TT menu] key.
2 Press the following buttons.
4 Target Track Setting
1 Target Track Color
On : Activate the Target Track Function.
Off : Deactivate the Target Track Function.
* Selecting "Off" deactivates the entire Target Track Function.
Tracks will not be recorded; therefore, they cannot be checked later on.
To Next Page
Loading...
Need help?
General
