JRC JMA-5208HS - Manual Speed Setting (Manual Speed)

7.2 NAVIGATOR SETTING
ņ20
7
yyy
yyyy
7.2.6 Manual Speed Setting (Manual Speed)
Procedure 1 Press [RADAR MENU] key twice.
The Main Menu will appear.
2 Press [7] key.
NAV Equipment Setting Menu will appear.
3 Press [4] key.
The Code Input menu will appear.
4 Pressing a numeric key, enter the value
and select “ENT.”
The multi-function control is also available for
the entry.
<The alternative procedure for steps above>
1 Hold down [RADAR MENU] key.
The Code Input Menu will appear.
2 Press [0] key.
3 Move the cursor onto the “ENT” button in the Code Input menu, and
press [ENT] key.
The Adjust Menu will appear.
4 Press [6] key.
NAV Equipment Setting menu opens.
5 Perform steps 3 and 4 in the “Procedure” above.
Note: The manually entered speed is effective only when “Manual” is set.