3.5 GENERAL OPERATIONS
3ņ62
3
y
y y
3.5.18 Operate Multi-Function Control [MULTI]
The multi-function control [MULTI] is provided to change the settings of parameters such as the length of
radar trails. Turn the control to select a parameter. Radar operation is simplified by using the control.
[I] Initial Setting (Multi Dial Setting)
Set parameters that can be operated with the multi-function control.
A parameter set to ON can be called by turning [MULTI] control.
Procedure 1 Press [RADAR MENU] key twice.
Press [8] key.
Press [2] key.
The Multi Dial Setting Menu will appear.
2 Press the numeric key of the number of
the parameter whose setting is to be
changed.
The setting will be switched between ON
and OFF .
ON : Can be operated with the multi-function
control.
OFF : Cannot be operated with the
multi-function control.
Parameters
1. Vector Length: Vector length of TT
2. Trails Length: Length of radar trails
3. TT TGT Display No.: TT target number for which values are to be
displayed
4. C-UP Angle: Course in course-up mode bearing mode
5. Own Track Color: Available with plotter option.
6. Mark/Line Color: Available with plotter option.
To Next Page
Loading...
