7.5 MAINTENANCE MENU
ņ52
7
yyy
yyyy
7.5.2 Initialization of Memory Area (Area Initial)
If system operation is unstable, it may be stabilized by initializing the memory area. To initialize the memory
area, follow the procedure in this section. The memory area is reset to the factory setting when initialized.
[I] Partial Master Reset
Procedure 1 Hold down [RADAR MENU] key.
The Code Input Menu will appear.
2 Press [0] key.
3 Move the cursor onto the “ENT” button
in the Code Input menu, and press
[ENT] key.
The Adjust Menu will appear.
4 Press [2] key.
The Maintenance Menu will appear.
5 Press [2] key.
The Partial Master Reset Execution Check
window will appear.
1 YES: Execution of Partial Master Reset
2 NO: Cancellation
The memory areas of specified items are initialized, and the system is restarted.
To Next Page
Loading...
Need help?
General
