SECTION 3
BASIC OPERATION
3.1 FLOW OPERATION ...................................................................................... 3-1
3.1.1 Power ON and Start the System .......................................................... 3-2
3.1.2 Observe and Adjust Video ................................................................... 3-3
3.1.3 Acquire and Measure Data ................................................................... 3-4
3.1.4 Display and Measure with Reference to CCRP .................................. 3-4
3.1.5 End the Operation and Stop the System ............................................ 3-5
3.2 MENU COMPOSITION .................................................................................. 3-6
3.2.1 Overview of Menu Structure ................................................................ 3-6
3.2.2 Basic Menu Operation .......................................................................... 3-7
3.3 PREPARATION ............................................................................................. 3-9
3.3.1 Adjust Display Brilliance [BRILL] ........................................................ 3-9
3.3.2 Adjust Contrast ..................................................................................... 3-9
3.3.3 Adjust Operation Panel Brilliance [PANEL] ...................................... 3-10
3.3.4 Switch Day/Night Mode [DAY/NIGHT] ............................................... 3-10
3.3.5 Adjust Brilliance of Information on Radar Display
(Brilliance Setting) .......................................................................... 3-11
3.3.6 Adjust Sound Volume (Buzzer Volume) ............................................ 3-12
3.3.7 Reset Alarm Buzzer [ALARM ACK] ................................................... 3-12
3.3.8 Set Display Color ................................................................................ 3-13
3.4 BASIC OPERATIONS ................................................................................. 3-15
3.4.1 Start Transmission [TX/PRF] ............................................................. 3-15
3.4.2 Stop Transmission [STBY] ................................................................. 3-15
3.4.3 Change Range (Observation Range Scale) [RANGE+/-] ................. 3-15
3.4.4 Tune ..................................................................................................... 3-16
3.4.5 Control Sensitivity [GAIN/PL] ............................................................ 3-17
3.4.6 Suppress Sea Clutter [AUTO-SEA] ................................................... 3-18
3.4.7 Suppress Rain/Snow Clutter [AUTO-RAIN] ...................................... 3-20
3.4.8 Reject Radar Interference [IR] ........................................................... 3-22
3.4.9 Hide/Display Range Rings (RINGS) ................................................... 3-23
3.4.10 Hide Ship’s Heading Line (HL OFF) ................................................. 3-23
3.4.11 Hide Graphics Information on Radar Display
(Graphic Display) ............................................................................ 3-24
3.5 GENERAL OPERATIONS ........................................................................... 3-25
3.5.1 Move Cross Cursor Mark by Trackball .............................................. 3-25
3.5.2 Use EBLs (Electronic Bearing Lines) [EBL1/2] ................................ 3-26
3.5.3 Set EBL Operation (EBL1 /2 Setting) ................................................ 3-29
3.5.4 Display Variable Range Markers [VRM1/VRM2] ............................... 3-32
3.5.5 Display Parallel Cursors (Parallel Cursor) ........................................ 3-34
3.5.6 Display Parallel Index Lines (Parallel Index Line) ............................ 3-41
3.5.7 Switch Bearing Display Mode [AZI MODE] ....................................... 3-48
3.5.8 Switch True/Relative Motion Display Mode [TM/RM] ....................... 3-49
3.5.9 Move Own Ship’s Display Position [OFF CENT] .............................. 3-50
3.5.10 Display Radar Trails (Other Ships’ Trails) [TRAILS] ...................... 3-51
3.5.11 Switch Pulse Length (GAIN/PL) ....................................................... 3-54
3.5.12 Expand Targets (Target Enhance) ................................................... 3-55
3.5.13 Use Video Process (Process) .......................................................... 3-56
3.5.14 Zoom ................................................................................................. 3-57
3.5.15 Use Marker [MOB] ............................................................................ 3-58
3.5.16 Marking [MARK] ............................................................................... 3-59
3.5.17 Operate EBL Maneuver Function (EBL Maneuver) ........................ 3-60
3.5.18 Operate Multi-Function Control [MULTI] ........................................ 3-62
3.5.19 Operate User Key Switches [User Key 1/2] .................................... 3-64
3.5.20
Automatic Acquisition ..................................................................... 3-66
3.5.21 Radar Alarm (Radar Alarm) .............................................................. 3-69
3.6 USE OWN SHIP'S TRACK DATA (OWN TRACK) ................................... 3-74
3.6.1 Display Own Ship’s Track (Display Own Track) ............................... 3-74
3.6.2 Set Own Ship’s Track Data Storage Interval
(Own Track Interval) ....................................................................... 3-76
3.6.3 Cancel Storing of Own Ship’s Track Data (Own Track Memory) .... 3-77
3.6.4 Clear Own Ship’s Track Data (Clear Own Track) .............................. 3-78
3.7 DISPLAY CHARTS...................................................................................... 3-79
3.7.1 Insert/Remove a Card ........................................................................ 3-79
3.7.2 Display Coastline ROM Card Produced by JRC .............................. 3-81
3.7.3 Display ERC Card ............................................................................... 3-82
3.7.4 Fill Charts (Fill Land Area) ................................................................. 3-83
3.8 DISPLAY NAVIGATION INFORMATION
(NAV INFORMATION DISPLAY) ................................................................. 3-84
3.8.1 Display Waypoint Marks (Waypoint Display) ................................... 3-84
3.8.2 Display Navigation Information (NAV Display Setting) ................... 3-85
3.8.3 Create/Edit Navigation Information (Edit User Map) ....................... 3-86
3.8.4 Set Navigation Information (User Map Setting) ............................... 3-92
3.8.5 Set and Display Geodetic System ..................................................... 3-99
3.9 APPLIED OPERATIONS ........................................................................... 3-101
3.9.1 Set Radar Signal Processing (Process Setting) ............................ 3-101
3.9.2 Set Radar Trails (RADAR Trails Setting) ........................................ 3-104
3.9.3 Set Cursor (Cursor Setting) ............................................................. 3-109
3.9.4 Set Screen(Screen Setting) .............................................................. 3-111
3.9.5 Set Scanner (TXRX Setting) ............................................................ 3-121
3.9.6 Set Chart Display (Map Setting) ...................................................... 3-123
3.9.7 Set LORAN C (LORAN C Correction) .............................................. 3-135
3.10 USE FUNCTION SWITCH [FUNC] ........................................................... 3-136
3.10.1 Operation Procedure ...................................................................... 3-136
3.10.2 Function Setting Menu Items ........................................................ 3-137
3.10.3 Overview of Function Operations ................................................. 3-138
3.10.4 Overview of Stored Function Setting Data ................................... 3-142
3.10.5 Personal Information (PIN Setting) ............................................... 3-143
3.11 USING CARD ............................................................................................ 3-146
3.11.1 Save in and Transfer to Card (MEM CAPA/Copy) ........................ 3-147
3.11.2 Erase/Initialize Card Memory (CLR MEM/INIT Card) .................... 3-152
To Next Page
Loading...
Need help?
General
