JRC JMA-5208HS User Manual

3.11 USING CARD
3ņ152
3
y
y y
3.11.2 Erase/Initialize Card Memory (CLR MEM/INIT Card)
Erase saved information from inside the processor.
[I] Erase Mark/Line (CLR Mark/Line Data)
Erase saved mark/line from inside the processor.
Procedure 1 Press [RADAR MENU] key.
The Main Menu will appear.
2 Press [9] key.
The Plot Menu will appear.
3 Press [7] key.
The CLR MEM/INT Menu will appear.
4 Press [1] key.
A window will appear to select whether or not
marks/lines should be erased.
1. Erased
2: Cancel
[II] Erase Waypoint/Route (CLR WPT/Route Data)
Erase saved WPT/Route from inside the processor.
Procedure 1 Press [RADAR MENU] key.
The Main Menu will appear.
2 Press [9] key.
The Main Menu will appear.
3 Press [7] key.
The CLR MEM INIT Card Menu will appear.
4 Press [2] key.
The Waypoint/Route Erase Execution window will appear.
1. Erase
2: Cancel

JRC JMA-5208HS Specifications

General

Brand	JRC
Model	JMA-5208HS
Category	Marine Radar
Language	English