ņ25
5.2.5 Input of target information (TT Individual Setting)
This radar enables name inputs and target track color changes for individual TT targets acquired.
Procedure 1 Turn OFF the cursor mode.
Software button Õ± located at the top right corner of the radar display described in
Section 2.3.3 is available to change the cursor mode.
2 Place the cursor over the target and then press [CLR/INFO] key.
The TT Individual Setting INFO screen opens.
* This function is available only when the cursor mode is set to OFF.
Target information screen
Item overview
Target ID : Target ID currently selected.
Name : The name of the target. It is
blanked in the initial status. The
user is to enter a name.
Track Color : Determines a target track color.
Association Priority :
Specify whose target information
is to be displayed between an AIS
target and a TT target when an
association is made.
Reference Target :
On : Set this target as a reference
target.
Off : Stop using this target as a
reference target.
To Next Page
Loading...
Need help?
General
