5.3 AIS OPERATION
ņ38
5
yy
yyy
Procedure 1 Press [TT MENU] key.
2 Press [3] key.
The Target Setting Menu will appear.
3 Press [5] key.
The ten-key screen will appear.
4 Using numeric keys, enter the CPA
value you want to set, and then press
[ENT] key.
The entered CPA Limit value is determined.
5 Press [6] key.
The ten-key screen will appear.
6 Using numeric keys, enter the TCPA value you want to set, and then
press [ENT] key.
The entered TCPA Limit value is determined.
To Next Page
Loading...
Need help?
General
