3.10 Use User Setting
y
y y
3.10 USE USER SETTING
The operation status of the radar is recorded. If the system is operated by more than one operator,
the operators can register operation status as suitable for them and call the status. Operation status
for up to five operations can be registered, and a name can be assigned to each status. (Up to 10
alphanumeric characters)
* Data saved by the user setting
3
• Display Color Setting menu
• Buzzer Volume
• User Key Setting menu
• Display Style (Date display style)
• EBL / VRM Control CURS
• Cursor Length
3.10.1 Save Operating State (Save User Setting)
The system's current operating state can be saved in the system by performing the operation below.
Procedures 1 Press the [RADAR MENU] key twice.
2 Open the User Setting menu by performing the following menu
peration.
o
5. Sub Menu
→ 3. User Setting
3 ress the [2] key. P
T
he Input File Name menu will appear.
4 Enter the file name to be saved.
The operating state data will be saved.
Up to 10 characters can be entered.
For the input method on the character input screen, see Section 3.3.4.
3-102
To Next Page
Loading...
Need help?
General
