3.12.3 Display JRC Chart on CF Card (SEL JRC ROM Card File)
By copying multiple JRC coastline ROM cards onto a compact flash memory card, this function
selectively displays any two charts among the copied charts. For a ship that sails in the wide range,
this function is convenient because charts can be selected from the menu without alternately inserting
JRC coastline ROM cards.
Note: The copied chart can operate only in the system that originally copied the chart.
The copied chart cannot be operated in other systems. The capacity of the compact flash
memory card to be used is 2GB or less.
[I] Copying a JRC ROM card to a CF card (Copy JRC ROM Card to CF)
Procedures 1 Insert a JRC coastline ROM card into card slot 1 (lower) and insert a
compact flash memory card into card slot 2 (upper).
Flash memory card (option) is necessary.
A PCMCIA (PC card) adapter for the compact flash memory card is necessary to
insert a compact flash memory card.
For the insertion and removal of the card, see HOW TO INSERT AND REMOVE A
CARD in the appendix.
2 Press the [Map] key for 2 seconds.
The Map Setting menu will appear.
3 Open the JRC / ERC Setting menu by performing the following menu
operation.
3. JRC/ERC Setting
→ 9. Next
4 Press the [7] key.
Confirmation Window will appear.
5 Press the [1] key.
Data on the JRC card will be copied onto the compact flash memory card.
6 To copy multiple JRC charts, alternately change JRC coastline ROM
cards and repeat procedures 4 and 5.
3-111
To Next Page
Loading...
Need help?
General
