5.1 Preparation
yy
yyy
5.1 PREPARATION
This section explains the features of the target tracking and AIS functions, and the initial setting for using each
function.
Target Tracking Function (Option)
The target tracking function calculates the course and speed of a target by automatically tracking the
target's move.
The target tracking function enables the automatic acquisition of targets by using the automatic
acquisition zone function.
The target tracking function also enables the simulation of the ship maneuvering method to avoid
collisions by using the trial maneuver function. (NCA-877WA)
If the mode is ground stabilization, SOG/COG used for own ship's information in target tracking. If the
mode is sea stabilization, SPD (speed through the water) / HDG (heading) used for own ship's
information in target tracking.
5
Normal edition
NCA-877A
High performance edition
NCA-877WA
Maximum number of targets that
can be tracked
30 100
Trial maneuver function Not provided Provided
Note: ARPA Process Unit (NCA-877WA) or ATA Process Unit (NCA-877A) must be fitted on ships
compliant to IMO.
AIS (Automatic Identification System) function (Option)
The AIS function shows the target’s information on the radar display, using other ship's information sent
out from the AIS unit.
Note:
AIS Process Unit must be fitted on ships compliant to IMO.
5-2
To Next Page
Loading...
Need help?
General
