JRC JMA-5312-6 - Decision of Targets as Identical (Association)

5.4 Decision of Targets as Identical
yy
yyy
5.4 DECISION OF TARGETS AS IDENTICAL
(ASSOCIATION)
CAUTION
If a great value is set as a condition for deciding targets as
identical, a tracking target near an AIS target is regarded as
identical to the AIS target and it may not be displayed any
more.
For example, when a pilot boat (which is a small target not
being tracked) equipped with an AIS function approaches a
cargo ship as a tracking target not equipped with an AIS
function, the tracking target symbol of the cargo ship may
not be displayed any more.
5
Setting of Function to Decide Targets as Identical (Association)
When an AIS target and a tracking target are decided to be identical, an association symbol is displayed for
the targets regarded as identical. In this case, the AIS target symbol is automatically activated.
z Turn off Association in order not to make a decision
on if targets are identical, or in order to display
symbols that have disappeared.
Attention
Procedures 1 Put the cursor on the association On/Off (TT/AIS information ⑪on
page 2-23), and press the [ENT] key.
Association will be set to on or off.
5-42