JUMO dTRANS T06 - Behavior When Leaving the Scaling Range

7 Configuration
72
7.5.12 Behavior when leaving the scaling range
The standard signal ranges of the analog output are limited as follows according to the recommendation of NAMUR NE 43:
Signal type
Lower
limit
Upper
limit
In this example, the measured value is output from 0 to 100°C at the analog output with
4to 20mA.
4to20mA 3.6 mA 21.2 mA
0 to 20 mA -0.4 mA 21.2 mA
2 to 10 V 1.8 V 10.6 V
0 to 10 V -0.2 V 10.6 V
Caution
The analog output is part of the safety function.
NFBTVSFEWBMVF
"OBMPHPVUQVU
4UBSUN"
&OEN"
N"
&SSPSTJHOBMOFHBUJWF
N"
0VUQVUSBOHFQFSEFGBVMUUP
4JHOBMUZQFUPN"
4DBMJOH
FHNFBTVSFE5FNQFSBUVSFPG1U
«$
«$
«$ «$
MJNJUBUJPO
POUIFUPQ
CPUUPNMJNJUBUJPO
N"
&SSPSTJHOBMQPTJUJWF
N"