10 Setup program
90
10 Setup program
The program and the connecting cable are available as accessories and
offer the following possibilities:
- Easy and comfortable parameterization and archiving via PC
- Easy parameter duplication for identical types of devices
10.1 Minimum hardware and software require-
ments:
- PC Pentium III or higher
- 200 MB free hard disk space
-CD-ROM drive
- Free USB interface, mouse connection
-Microsoft
1
Windows7 (32-bit) -> 1GB RAM
-Microsoft
1
Windows7 (64-bit) -> 2GB RAM
h Connect the device to the PC using the USB cable
10.2 Displaying the device software version
h Press the key
h Use to switch to device info and press
h Press and the software version appears.
The software versions for the device and the setup program
must be compatible. Only the last two digits may be different, otherwise
an error message appears!
The version of the setup prog. appears under Info
Info about setup.
1. Microsoft is a registered trademark of Microsoft Corporation
To Next Page
Loading...
