JUMO dTRANS T06 - Page 81

9 Technical data
81
a The accuracy specifications refer to the maximum measuring range. Smaller measuring ranges lead to reduced linearization accuracy.
Pt100
2/3-wire circuit
4-wire circuit
GOST 6651-2009 A.2
-100 to +200 °C
-200 to +850 °C
-100 to +200 °C
-200 to +850 °C
±0.2 K
±0.4 K
±0.15 K
±0.25 K
3.91×10
-3
1/K 90
Cu50
2/3-wire circuit
4-wire circuit
GOST 6651-2009 A.3
-180 to +200 °C
-180 to +200 °C
±0.5 K
±0.3 K
4.28×10
-3
1/K 90
Cu100
2/3-wire circuit
4-wire circuit
GOST 6651-2009 A.3
-180 to +200 °C
-180 to +200 °C
±0.4 K
±0.2 K
4.28×10
-3
1/K 90
Measuring current < 0.3 mA
Sensor line resistance ≤ 50 Ω per line for 3- and 4-wire circuit
≤ 100 ohms line resistance for 2-wire circuit
Lead compensation Not required for 3-wire or 4-wire circuit. In 2-wire circuits, lead compen-
sation is performed in the software by entering a fixed line resistance.
Special features - Can also be programmed in °F
- Basic sensor type can be changed with sensor factor (e.g., Pt50 to
Pt100)
Designation Standard Measuring range Measuring accura-
cy
a
T
K
ITS