11 Error messages
96
Voltage supply Internal The voltage supply is insufficient.
Check voltage supply.
Frequency deviation Internal Error of the independent time base.
Restart device / return device.
EEPROM defective Internal Error during internal communication with the EEPROM.
Restart device / return device.
Stack Internal Error in the memory area reserved for the stack.
Restart device / return device.
AD converter Internal A program sequence error has occurred.
Restart device / return device.
Interrupt Internal Interrupt error
Restart device / return device.
Limit value System The configured limit value has been exceeded or fallen short of.
Check system / adapt limit value
Display Origin Cause/remedy
To Next Page
Loading...
