147
08.11 EN
Fork positioner
Access module
Optional equipment
Hydraulic operations W A B C
Check attachment is properly secured to the truck and the
supporting elements.
t
Test hose reel and check for leaks and damage. t
Attachment:
check bearing points, guides and stops for wear and damage,
grease and clean these components.
t
Test fork positioner and check for damage. t
Check cylinder piston rods and bushings. t
Test operation and setting of the attachment.
Check attachment for damage.
t
Check cylinder seals. t
Check sliding blocks are complete. t
Check axial play of the front and rear rollers and adjust if necessary. t
Check hydraulic ports and tighten if necessary. t
Attachment:
Clean and lubricate.
t
Electrical System W A B C
Test access module, check for damage and make sure it is secure. t
Chassis and superstructure W A B C
Check that optional equipment such as mirrors, storage
compartments, grips, windscreen wipers and washing systems etc.
are working correctly and check for damage.
t
To Next Page
Loading...
Need help?
General
