•
To check the status of the Routing Engine on the router, issue the show chassis routing-engine command.
The output is similar to the following:
user@host> show chassis routing-engine
Routing Engine status:
Temperature 53 degrees C / 127 degrees F
CPU temperature 53 degrees C / 127 degrees F
DRAM 16341 MB (16384 MB installed)
Memory utilization 6 percent
5 sec CPU utilization:
User 0 percent
Background 0 percent
Kernel 0 percent
Interrupt 0 percent
Idle 100 percent
1 min CPU utilization:
User 0 percent
Background 0 percent
Kernel 0 percent
Interrupt 0 percent
Idle 100 percent
5 min CPU utilization:
User 0 percent
Background 0 percent
Kernel 0 percent
Interrupt 0 percent
Idle 100 percent
15 min CPU utilization:
User 0 percent
Background 0 percent
Kernel 0 percent
Interrupt 0 percent
Idle 100 percent
Model RE-S-2X00x6
Start time 2017-11-29 19:04:56 PST
Uptime 5 days, 4 hours, 58 minutes, 44 seconds
Last reboot reason 0x2000:hypervisor reboot
Load averages: 1 minute 5 minute 15 minute
0.10 0.14 0.15
SEE ALSO
116
To Next Page
Loading...
