Juniper MX204 Hardware Guide

DC Power Cable Specifications for MX204 Router
IN THIS SECTION
DC Power Cable Lug Specifications | 45
DC Power Cable Specifications | 45
DC Power Cable Lug Specifications
The accessory box shipped with the router includes the cable lugs that attach to the terminal of each
power supply.
Figure 15: DC Power Cable Lug
g009544
.170 max
wire diameter
(insulation)
.84
.71
.25
.15 dia
All measurements in inches
CAUTION: Before router installation begins, a licensed electrician must attach a cable
lug to the grounding and power cables that you supply. A cable with an incorrectly
attached lug can damage the router.
DC Power Cable Specifications
You must supply four DC power cables that meet the following specifications: 14-16 AWG (2.08 - 1.3 mm
2
),
minimum 60° C wire, or as required by the local code.
SEE ALSO
45

Juniper MX204 Specifications

General

Cooling type	Active
Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Number of fans	3 fan(s)
AC input voltage	100 - 240 V
Number of power supply units	2
Operating altitude	0 - 1828 m
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Depth	475 mm
Width	447 mm
Height	44.5 mm
Weight	10500 g