Juniper MX204 - Tools Required to Install the MX204 Chassis in Rack; Installing the MX204 Chassis in a Rack

Tools Required to Install the MX204 Chassis in Rack
To install the router, you need the following tools and parts:
•
Phillips (+) screwdriver, number 2
•
ESD grounding wrist strap
•
Blank panels to cover any slots not occupied by a component
•
Mounting brackets, supplied with the router
•
Sixteen screws for securing the mounting brackets to the chassis, supplied with therouter
•
Four mounting screws, supplied with the router
SEE ALSO
MX204 Site Preparation Checklist | 53
Installing the MX204 Chassis in a Rack
IN THIS SECTION
Installing the MX204 Chassis in a 19-in. Rack | 83
Installing the MX204 in a 21-in. ETSI Rack | 85
82