Juniper MX204 - Replacing an MX204 DC Power Supply; Removing an MX204 DC Power Supply

Figure 50: Installing an AC Power Supply
g009868
SEE ALSO
MX204 Power System Description | 33
MX204 Router AC Power Specifications | 38
AC Power Circuit Breaker Requirements for the MX204 Router | 39
Prevention of Electrostatic Discharge Damage | 173
Replacing an MX204 DC Power Supply
IN THIS SECTION
Removing an MX204 DC Power Supply | 130
Installing an MX204 DC Power Supply | 132
Removing an MX204 DC Power Supply
Before you remove a power supply, be aware of the following:
NOTE: The minimum required number of power supply modules must be present in the router at
all times.
130