Juniper MX204 - Maintaining MX204 Components; Routine Maintenance Procedures for MX204 Routers; Maintaining the MX204 Routing Engine

Maintaining MX204 Components
IN THIS SECTION
Routine Maintenance Procedures for MX204 Routers | 115
Maintaining the MX204 Routing Engine | 115
Replace an SFP+ Transceiver | 117
Replace a QSFP28 Transceiver | 119
Routine Maintenance Procedures for MX204 Routers
Purpose
For optimum router performance, perform preventive maintenance procedures.
Action
•
Inspect the installation site for moisture, loose wires or cables, and excessive dust. Make sure that airflow
is unobstructed around the router and into the air intake vents.
•
Check the status-reporting devices on the font panel—system alarms and LEDs.
SEE ALSO
Alarm LEDs on the MX204 Front Panel | 28
Maintaining the MX204 Routing Engine
Purpose
For optimum router performance, verify the condition of the Routing Engine on a regular basis.
Action
On a regular basis:
•
Check the LEDs on the front panel to view information about the status of the Routing Engine.
115