Juniper MX204 Hardware Guide

Verifying the MX204 Router Parts Received
A packing list is included in each shipment. Check the parts in the shipment against the items on the packing
list. The packing list specifies the part numbers and descriptions of each part in your order.
If any part is missing, contact a customer service representative.
A fully configured router contains the router chassis with installed components, listed in Table 32 on page 80,
and an accessory box, which contains the parts listed in Table 33 on page 80. The parts shipped with your
router can vary depending on the configuration you ordered.
Table 32: Parts List for a Fully Configured Router
QuantityComponent
1Chassis
2AC or DC power supply
3Fan module
1Documentation Roadmap and Product Warranty
One blank panel for each slot not
occupied by a component
Blank panels for slots without components installed
2Rack mount kit
16Philips M4x7mm flat head screws
Table 33: Accessory Box Parts List
QuantityPart
16Screws to mount chassis
2Screws to secure the ground cable lug
8DC power ring terminal lugs, 14 - 16 AWG, sized for
#6 screw
1Label, “Small Parts Enclosed”
1Label, “Accessories Contents”
80

Juniper MX204 Specifications

General

Cooling type	Active
Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Number of fans	3 fan(s)
AC input voltage	100 - 240 V
Number of power supply units	2
Operating altitude	0 - 1828 m
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Depth	475 mm
Width	447 mm
Height	44.5 mm
Weight	10500 g