KEB COMBIVERT F5 Reference Manual

260
DG - Diagnostics Parameters (Combivis only)
This parameter displays the Easy Direction and digital output status. DG80
can be monitored by controllers that utilize serial speed control via the
FB13-16 PDO mappings and is only visible with Combivis
Displays the type and number of drive faults logged.
Displays the date and time of the drive faults logged in DG93.
Displays the last fault generated by the drive.
DG80
Easy Direction
DG93
Fault Log (Count)
DG94
Fault Log (Timestamp)
DG99
Last Fault

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)