01 Getting started | 11
6. Switch on EVENT-X by pressing the POWER button: you can find it on the back of
the instrument on the far right. As you power it on, the LED lights up in the upper
right corner of the front panel.
7. Wait until the Home page shows up; now you are all set up and ready to start.
Power off the instrument
If needed, save any resources (accompaniment styles, voices, registrations etc) that you have
edited.
Now you can turn off the instrument:
1. Switch off all connected external units first to avoid power damages to the
equipment or sever popping sounds.
2. Make sure the MASTER volume slider is set to the minimum position.
3. Switch off EVENT-X by pressing the POWER button on the back of the
instrument.
To Next Page
Loading...
