176 | 13 Global menus and settings
• GLOBAL: When selected, the scale is no longer depending on how it is set in the Edit
Voice pages. Such setting is stored in the CUSTOM STARTUP.
• VOICE 2: It enables the Arabic scale to VOICE 2, otherwise applied to VOICE 1 only.
• RESET: Restore the original mdi of the Arabic stairs.
• SCALE MEM1-MEM6: To set an Arabic scale:
o Select the note you want to edit on the screen.
o Change the tuning value with the dial (DIAL).
o Press the RESET button on the screen to restore the original condition.
o After managing all the changes, press the SAVE button on the front
panel and, in the dialog frame that appears, choose Save to confirm the
save, Cancel to cancel the operation and Restore to restore the original
data.
Registration Setup
Press the MENU button on the front panel and the REGS button. SETUP to access the
Registration configuration page: Registrations save all the instrument settings but, when they
are called, they can keep some instrument parameters unchanged, at your choice.
The first page presents the left buttons showing the categories of configurable parameters. A
list of parameters belonging to the selected category appears on the right.
The GENERAL category selected when you enter this environment belongs to Transpose's
functions, the Sliders' parameters, the Footswitch pedals, the Arabic scales, and the controls
(Controls). The example page shows that only the Transpose function is active (in yellow).
When a Registration is loaded will be opened only the value of the tonal Transpose
contained in the Registration. In contrast, all other values - which are still saved with the
Registration - will be ignored. For example, if an Arabic scale was selected before calling the
Registration, it will remain unchanged when you choose a new Registration because the
SCALE parameter is inactive. If you want to make sure that other functions can also be called
To Next Page
Loading...
