44 | 04 Singing
04 Singing
Singing with a microphone
If you perform as a singer or play backing tracks for one or two singers, you can use EVENT-X as a
control console, avoiding the expense of a mixer or an additional vocal effects unit. Take EVENT-X with
you on stage, connect the microphone and an audio system, you have everything you need to make
your vocal performances excellent and exciting.
Connecting microphones
Up to two different microphones can be connected to the MICRO1 and MICRO2 inputs on
the back panel of the instrument. To achieve an optimal signal-to-noise ratio, you need to
adjust the input gain with knobs located next to the input ports: speak or sing into the
microphone, and if the gain is too high, the signal will be distorted, if the gain is too low, the
signal level will be too weak and may be imperceptible. We recommend using professional-
quality microphones and cables.
See Connecting a microphone (MICRO 1) and Connecting a guitar or bass (MICRO 2).
Press the MICRO button on the front panel to activate the microphone connected to the
MICRO 1 input.
Editing MICRO 1 and MICRO 2
To access microphone signal customization, press and hold the MICRO button on the front
panel for a few moments and this page opens on the screen.
To Next Page
Loading...
