170 | 13 Global menus and settings
Global options:
• Global Tune: allows to fine-tune the unit in hundredths of semitones (100 cents
include a semitone). The range is from -100 cents to +100 cents. The factory value of
this parameter is 0.
• Mod. Sensitivity: resizes the input MIDI messages of the Modulation Wheel (MIDI CC 1
and MIDI CC 33) by multiplying the received value by a weight coefficient. The factory
value of this parameter is 127 (full scale).
AFTERTOUCH options:
• Curve: set the AFTERTOUCH curve values between NORMAL, OPEN, and CLOSE.
• Sensitivity: reduces the pressure messages of the incoming MIDI channel
(AFTERTOUCH) by multiplying the received value by a weight coefficient. The factory
value of this parameter is 127 (full scale).
• Threshold: sets the value above which AFTERTOUCH could trigger Morphing, Rotor or
LFO values (AFTERTOUCH controls must be enabled in VOICE EDIT.
LIVE DRUMSET options:
• On/Off: Enable Wave Cycling on drums to increase the realism of sounds by not
repeating the same samples on each measure but cycling through various samples
e.g. using multiple SNARE samples to replicate the authentic snare drum which never
sounds the same way when hit twice.
Output Volume Level Options:
• MAIN LEVEL: Check the volume of the main output OUT and auxiliary outputs.
• MUTE: The main audio output can be muted.
To Next Page
Loading...
