06 Stem | 75
8. At the end, press the SAVE button on the front panel. Touch SAVE AS button to
name your Stem project. A virtual alphanumeric keyboard will appear on the
screen. Dial the new name and then press the ENTER key on the front panel. Press
the CANCEL button or press EXIT to cancel the operation.
9. In the SAVE window, press the REGISTRATION button to save the Stem project as
a recording.
Please note:
• We suggest including the BPM value of the audio track at the end of the file name (for
example, a file named Sax_120.wav).
• Once you have saved a Stem project, you can upload it by tapping the LOAD button:
the list of all Stem projects will appear on the left. Touch name to upload the project.
• If you save a .txt file with the same name in the same folder as your Stem project, the
text file will appear as LYRIC when a Stem project is uploaded, as described in Link
texts.
Expert advice
• Stem project files have the .stm extension.
• All audio files used in Stem projects are necessarily saved in a dedicated location on
the internal SSD: /media/back/STEM/WAVE/.
• The only recognized format is WAV with 16-bit resolution and sample rate of
44,100Hz.
To Next Page
Loading...
