Keysight Technologies 34410A - Setting up a LAN Connection from the Front Panel

98 34410A/11A/L4411A User’s Guide
3 Remote Interface Configuration
Setting up a LAN connection from the Front Panel
Press
UTILITY MENU > REMOTE I/O > LAN > ENABLE LAN? > LAN SETTINGS >
VIEW | MODIFY
• Select VIEW to view the current LAN settings.
• Select MODIFY to change the LAN settings. The following submenus are displayed:
1 RESET LAN? – NO or YES
2 DHCP – OFF or ON
3 AUTO IP – OFF or ON
4 IP ADDRESS. – Set IP address in dot notation using navigation keypad. This
parameter appears only if both DHCP and AUTO IP are OFF.
5 SUBNET MASK – Set subnet mask in dot notation using navigation keypad. This
parameter appears only if both DHCP and AUTO IP are OFF.
6 DEF GATEWAY – Set default gateway in dot notation using navigation keypad.
This parameter appears only if both DHCP and AUTO IP are OFF.
7 DNS SERVER – Set DNS address in dot notation using navigation keypad. This
parameter appears only if both DHCP and AUTO IP are OFF.
8 HOST NAME – Enter desired host name using navigation keypad. The Host
Name must be an string of alphanumeric characters plus dashes (“–”), up to 15
characters, with the first character a letter.
9 LAN SERVICES – ENABLE ALL or SELECT. SELECT allows you to enable or
disable the individual services (VISA LAN, SOCKETS, TELNET or WEB
SERVER).
If you disable or re–enable any of the LAN services, you must cycle the power on
the instrument for the change to take effect.
10 WEB PASSWORD – DISABLE or ENABLE. Select ENABLE and use the
navigation keypad to enter the desired password, up to 12 alphanumeric characters
in length.
NOTE
If you disable or re–enable the LAN interface, or any of the LAN services, you must
cycle the power on the instrument to activate the new configuration. Other settings are
activated by a LAN restart when you exit the LAN menu.