14 34410A/11A/L4411A User’s Guide
1 Quick Start
Basic Multimeter Operations
This section introduces the basics of the 34410A/11A multimeter, and how to use it.
Preparing the Multimeter for Use
To verify that your 34410A or 34411A multimeter is ready for use:
1 Check the list of supplied items.
Verify that you have received the following items with your multimeter.
If anything is missing, contact your nearest Keysight Sales Office.
• Test Lead Set.
• Power Cord.
• USB 2.0 Cable.
• Keysight 34410A/11A/L4411A Product Reference CD–ROM.
• Keysight Automation Ready (IO Libraries) CD–ROM.
• Certificate of Calibration.
The product documentation, including the Keysight 34410A/11A/L4411A
Programmer’s Reference Help and the product manuals, are included on the Product
Reference CD–ROM. Printed (hardcopy) manuals are optional, and included only if
you ordered them.
2 Connect the power cord and turn on the multimeter.
The front–panel display will light up while the multimeter performs its power–on
self–test. The multimeter powers up in the dc voltage function with autoranging
enabled (unless a previous user has configured power–up using a non–default stored
state (see “Multimeter State Storage” on page 49).
For basic information unique to the L4411A, refer to the L4411A Getting Started Guide
(p/n L4411-90001).
To Next Page
Loading...
