Keysight Technologies 34410A - Page 4

2 34410A/11A/L4411A User’s Guide
Notices
© Keysight Technologies 2005-2014
No part of this manual may be reproduced in
any form or by any means (including electronic
storage and retrieval or translation into a for-
eign language) without prior agreement and
written consent from Keysight Technologies
as governed by United States and
international copyright laws.
Manual Part Number
34410-90001
Edition
Edition 6, August 2014
Printed in Malaysia
Keysight Technologies
1400 Fountaingrove Parkway
Santa Rosa, CA 95403
Microsoft® and Windows® are U.S. registered
trademarks of Microsoft Corporation.
Software Revision
This guide is valid for the firmware that was
installed in the instrument at the time of manu-
facture. However, upgrading the firmware may
add or change product features. For the latest
firmware and documentation, go to the product
page at:
www.keysight.com/find/34410A
or
www.keysight.com/find/34411A
or
www.keysight.com/find/L4411A
Warranty
The material contained in this doc-
ument is provided “as is,” and is
subject to being changed, without
notice, in future editions. Further,
to the maximum extent permitted
by applicable law, Keysight
disclaims all warranties, either
express or implied, with regard to
this manual and any information
contained herein, including but not
limited to the implied warranties of
mer-chantability and fitness for a
par-ticular purpose. Keysight shall
not be liable for errors or for
incidental or consequential
damages in connec-tion with the
furnishing, use, or performance of
this document or of any information
contained herein. Should Keysight
and the user have a separate
written agreement with warranty
terms covering the mate-rial in this
document that conflict with these
terms, the warranty terms in the
separate agreement shall control.
Technology Licenses
The hardware and/or software described in this
document are furnished under a license and
may be used or copied only in accordance with
the terms of such license.
Restricted Rights Legend
U.S. Government Restricted Rights. Software
and technical data rights granted to the federal
government include only those rights custom-
arily provided to end user customers. Keysight
provides this customary commercial license in
Software and technical data pursuant to FAR
12.211 (Technical Data) and 12.212 (Computer
Software) and, for the Department of Defense,
DFARS 252.227-7015 (Technical Data - Com-
mercial Items) and DFARS 227.7202-3 (Rights
in Commercial Computer Software or Com-
puter Software Documentation).
Safety Notices
CAUTION
A CAUTION notice denotes a hazard.
It calls attention to an operating pro-
cedure, practice, or the like that, if not
correctly performed or adhered to,
could result in damage to the product
or loss of important data. Do not pro-
ceed beyond a CAUTION notice until
the indicated conditions are fully
understood and met.
WARNING
A WARNING notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the like
that, if not correctly performed or
adhered to, could result in per-
sonal injury or death. Do not pro-
ceed beyond a WARNING notice
until the indicated conditions are
fully understood and met.