34410A/11A/L4411A User’s Guide 5
Additional Notices
Waste Electrical and Electronic
Equipment (WEEE) Directive
2002/96/EC
This product complies with the WEEE Directive
(2002/96/EC) marking requirement. The affixed
product label (see below) indicates that you
must not discard this electrical/electronic prod-
uct in domestic household waste.
Product Category: With reference to the
equipment types in the WEEE directive Annex
1, this product is classified as a "Monitoring
and Control instrumentation" product.
Do not dispose in domestic household waste.
To return unwanted products, contact your
local Keysight office, or see
www.keysight.com/environment/product
for more information.
Keysight 34138A Test Lead Set
The Keysight 34410A/11A is provided with
a Keysight 34138A Test Lead Set,
described below.
Test Lead Ratings
Test Leads - 1000V, 15A
Fine Tip Probe Attachments - 300V, 3A
Mini Grabber Attachment - 300V, 3A
SMT Grabber Attachments - 300V, 3A
Operation
The Fine Tip, Mini Grabber, and SMT Grabber
attachments plug onto the probe end of the
Test Leads.
Maintenance
If any portion of the Test Lead Set is worn or
damaged, do not use. Replace with a new
Keysight 34138A Test Lead Set.
If the Test Lead Set is used in a
manner not specified by Keysight
Technologies, the protection pro-
vided by the Test Lead Set may be
impaired. Also, do not use a dam-
aged or worn Test Lead Set.
Instru-ment damage or personal
injury may result.
To Next Page
Loading...
