6000 X-Series Oscilloscopes Service Guide 11
Tables
Table 1. List of test equipment / 19
Table 2. Conventions / 20
Table 3. Materials required to construct the test connectors / 21
Table 4. Equipment Required to Test Digital Channel Threshold Accuracy / 25
Table 5. Threshold Accuracy Voltage Test Settings / 27
Table 6. DC Vertical Gain Accuracy Test Limits / 29
Table 7. Equipment Required to Verify DC Vertical Gain Accuracy / 29
Table 8. Settings Used to Verify DC Vertical Gain Accuracy / 30
Table 9. Equipment Required to Verify Dual Cursor Accuracy / 34
Table 10. Settings Used to Verify Dual Cursor Accuracy / 35
Table 11. Bandwidth (-3 dB) Test Limits / 38
Table 12. Equipment Required to Verify Bandwidth (-3 dB) / 38
Table 13. Equipment Required to Verify Time Base Accuracy / 43
Table 14. Internal Trigger SensitivityTest Limits / 45
Table 15. External Trigger Sensitivity Test Limits, All Models / 45
Table 16. Equipment Required to Verify Trigger Sensitivity / 46
Table 17. External Trigger Sensitivity Test Settings / 49
Table 18. Equipment Required to Troubleshoot the Oscilloscope / 69
Table 19. DC output from power supply / 74
Table 20. Fan power / 76
Table 21. Power supplies to acquisition board (from power board J105) / 78
Table 22. Power supplies to front panel board (AutoProbe power, from power board
J106) / 81
Table 23. Replaceable Parts / 120
Table 24. Description of Safety related symbols that may appear on a product / 126
To Next Page
Loading...
Need help?
General
