4 6000 X-Series Oscilloscopes Service Guide
Digital Channels
Because all of the oscilloscopes in the Keysight 6000 X-Series have analog channels, the analog
channel topics in this book apply to all instruments. Whenever a topic discusses the digital channels,
that information applies only to Mixed-Signal Oscilloscope (MSO) models or DSO models that have
been upgraded to an MSO.
Abbreviated instructions for pressing a series of keys
Instructions for pressing a series of keys are written in an abbreviated manner. Instructions for pressing
Key1, then pressing Softkey2, then pressing Softkey3 are abbreviated as follows:
Press [Key1] & Softkey2 & Softkey3.
The keys may be front panel keys, or softkeys, which are located directly below the oscilloscope
display.
To Next Page
Loading...
Need help?
General
