Keysight Technologies InfiniiVision 6000 X Series User Manual

6 6000 X-Series Oscilloscopes Service Guide
Contents
What to Test / 24
Verifying Test Results / 24
To verify DC vertical gain accuracy / 29
To verify dual cursor accuracy / 34
To verify bandwidth (-3 dB) / 38
To verify time base accuracy / 43
To verify trigger sensitivity / 45
Test Internal Trigger Sensitivity / 46
Test External Trigger Sensitivity (all models) / 49
Keysight 6000 X-Series Oscilloscopes Performance Test
Record / 52
3 Calibrating and Adjusting
User Calibration / 57
To perform User Calibration / 57
User Calibration Status / 57
4 Troubleshooting
Solving General Problems with the Oscilloscope / 60
If there is no display / 60
If there is no trace display / 60
If the trace display is unusual or unexpected / 61
If you cannot see a channel / 61
Verifying Basic Operation / 63
To power-on the oscilloscope / 63
To perform hardware self test / 64
To perform front panel self test / 64
To verify default setup / 64
To perform an Auto Scale on the Probe Comp signal / 66
To compensate passive probes / 67

Keysight Technologies InfiniiVision 6000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 6000 X Series
Category	Test Equipment
Language	English