Keysight Technologies InfiniiVision 6000 X Series User Manual

Troubleshooting 4
6000 X-Series Oscilloscopes Service Guide 65
• Channel 1 on.
• 5V/div scale.
• dc coupling.
• 0V position.
• probe factor to 1.0 if an AutoProbe probe is not connected to the channel.
• Trigger:
• Edge trigger.
• Auto sweep mode.
• 0 V level.
• channel 1 source.
• dc coupling.
• rising edge slope.
• 40 ns holdoff time.
• Display:
• 20% grid intensity.
• persistence off.
• Other:
• Acquire mode normal.
• Run/Stop to Run.
• cursor measurements off.

Keysight Technologies InfiniiVision 6000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 6000 X Series
Category	Test Equipment
Language	English