Keysight Technologies U1253B - Figure 4-7 Thermocouple Type Setup; Setting Temperature Unit; Setting Thermocouple Types

4 Changing the Default Settings
120 Keysight U1253B User’s and Service Guide
Setting thermocouple types
The types of thermocouple sensor that can be selected are J-type and K-type. The
default type is K-type.
Figure 4-7 Thermocouple type setup
Setting temperature unit
The temperature unit setting at power on
Four combinations of displayed unit(s) are available:
1 Celsius only: °C single display.
2 Celsius/Fahrenheit: °C/°F dual display; °C on primary, and °F on secondary.
3 Fahrenheit only: °F single display.
4 Fahrenheit/Celsius: °F/°C dual display; °F on primary, and °C on secondary.